TRAINING ELECTRICAL GROUNDING LIGHTNING PROTECTION
Course Description:
The Power Systems Grounding Seminar provides a practical understanding of system and equipment grounding. Actual case studies and in-class exercises provide knowledge needed for solving grounding problems, designing new systems or maintaining existing facilities. Power systems grounding problems cause unexplained system outages. Highly qualified Siemens Westinghouse instructors can provide you with knowledge and experience to recognize, evaluate and verify grounding system elements.
Course Objectives:
- Explain the Reasons for Grounding, Shock Hazards, System Ground Versus Equipment Grounds
- Describe the Basics of System Grounding
- Describe Typical Ground Fault Schemes and Switchgear Performance Testing
- Explain Symmetrical and Fault Calculations
- Outline NEC Requirements
- Summarize Computer and Instrumentation Grounding
- Explain Ground Grid Resistance
Who Should Attend:
The course is suggested for graduate engineers or personnel with equivalent work experience in electrical power systems. Consultants, application engineers, design engineers and electrical engineers from large industrial plants or municipal distribution systems will find this course very beneficial. Attendance at the Siemens Westinghouse Industrial Power Systems Analysis Seminar or equivalent is strongly recommended as a prerequisite.
Course Content
- Introduction to Power Systems Grounding
IEEE Standard 142-1991
Grounding Nomenclature
Systems Grounding
Systems Grounding
- Basics of System Grounding
Ungrounded Systems
Grounded System
Ground Fault Detection
Ground Fault Coordination
- NEC Requirements
Article 250-1 Scope
Separately Derived Systems
Equipment
Sizing Grounding Electrode Conductors
- Computer Grounding
Separately Derived ADP Power Supply
Single Point Grounding
Safety vs. Signal Grounding
Raised Floor Signal Reference Grids
Modular Power Centers
- Ground Grid Resistance
Grounding System Components
Effects of Ground Resistance
Improving Ground Resistance
Ground Resistivity Measurements
Ground Resistance Measurements
Calculating Resistance for Large Substation Ground Grids
- Ground Grid Design
IEEE Standard 80-1986
Maximum Mesh, Step and Touch Voltages
Permissible Body Current Limits
In-Class Calculations and Evaluations of Ground Grids
Fasilitas TRAINING ELECTRICAL GROUNDING LIGHTNING PROTECTION
- Lokasi Training di Hotel Bintang 3-5
- Sertifikat Training
- Modul Materi (Hard Copy & Soft Copy)
- Flashdisk
- Training Kit (Co-Card, Bolpoin, & Buku Catatan)
- Souvenir Eksklusif
- 1x Makan Siang dan 2x Coffee Break (Jam 10:00 & 14:00)
- Penjemputan Bandara – Hotel (Pulang-Pergi selama pelatihan)
Biaya dan Lokasi TRAINING ELECTRICAL GROUNDING LIGHTNING PROTECTION
- Yogyakarta : Rp 8.800.000,- / Peserta
- Bandung : Rp 8.800.000,- / Peserta
- Jakarta : Rp 8.800.000,- / Peserta
- Surabaya : Rp 8.800.000,- / Peserta
- Malang : Rp 8.800.000,- / Peserta
- Semarang : Rp 8.800.000,- / Peserta
- Solo : Rp 8.800.000,- / Peserta
- Bali : Rp 7.000.000,- / Peserta (Minimal 2 peserta)
- Lombok: Rp 7.400.000,- / Peserta (Minimal 2 peserta)
Keterangan
- Biaya diatas jika 1 perusahaan hanya mengirimkan 1 peserta.
- Jumlah peserta memperngaruhi biaya diatas, jadi jika 1 perusahaan mengirimkan 2 atau lebih peserta maka biayanya dapat dibawah (turun) dari biaya yang tertera diatas.
- Biaya dan Lokasi diatas hanya untuk Private Training dan Public Training, untuk In House Training penawarannya dapat menghubungi kami dilink berikut (kontak kami).
- Jumlah peserta, jadwal training dan lokasi training dapat menyesuaikan permintaan.
- Pemintaan lokasi yang diluar daftar diatas dapat menghubungi kontak Marketing Kami.
Untuk melihat jadwal pelatihan ini kunjungi Jadwal Training Update dan jika ingin mendaftar pelatihan ini, silakan isi form di Formulir Pendaftaran.
